digital divide network - article database

Vibrating Screen are used to separate materials into various sizes for further processing. Or for end use. Depending on our need. The material is separated by passing it through a vibrating “screen box” which has a number of different sized screens, or meshes, which the material falls through like a sieve, the material falls onto attached conveyors which stock pile the end products. The end products can then be used in the building and construction industries.

YBZD, blast-proof vibrating motor, is more widely used in vibrating screen industry because the performance of vibrating motor is relatively high, which can well solve the problems in the vibrating mechanical operation. The motor is the core component of the vibration screen. So it is very necessary to choose a good vibrating motor.

The blast-proof vibrating motor is composed of explosion-proof motor and eccentric block, when the motor rotate by energizing, the exciting force generated by eccentric block passed to the vibrating machine by footing.

The installation and adjustment of the blast-proof vibrating motor

The blast-proof vibrating motor should be firmly installed at the vibrating machine without loosening. After the first use, the anchor bolt should be reinforced.

The blast-proof vibrating motor is connected to the power supply by rubber sheathed soft cable (the outer diameter of the rubber sleeve is 15mm), and the wiring steps are as follows:

A. Clean outside the junction box, strip the insulator of the cable portion.

B. Unloaded the outlet line gland, cable gland guide sleeve, the sealing ring and the junction box in sequence.

C. Put cable on outlet line gland, a cable guide sleeve and the sealing ring, and then connect the power wire and grounding wire respectively to the terminal and the grounding screw while pay attention to avoid the exposed part of the guide line exposing out of the bow type washers.

D. Well install the guide sleeve, sealing ring, cable outlet plate and the junction box cover.

E. In the disassembly and assembly, we should pay attention to protect the explosion-proof surface and do not damage it, when assemble the motor, the motor should be coated with 204-1antirust oil, the explosion-proof surface shall be close fitting after the installation.

In a word, vibrating screen is flexibly used before or after stone crushing according to the production condition and requirement for complete screening and classifying of the material, contributing to the output realization of different stones and sands.vibrating screen is also used before the primary crushing to prevent over-large stones from entering the crusher so that the production goes forward well. It uses common motor to drive vibrator, and makes the screen along with the direction of exciting force do periodic movement to and fro. The materials make circular movement on the screen to realize sieving.To a service-oriented brand integrity,As the professional manufacturer of complete sets of mining machinery ,like rock crushers, Henan Hongxing is always doing the best in products and service.