digital divide network - article database

Crushing

Some ores occur in nature as mixtures of discrete mineral particles, such as gold in gravel beds and streams and diamonds in mines. These mixtures require little or no crushing, since the valuables are recoverable using other techniques (breaking up placer material in log washers, for instance). Most ores, however, are made up of hard, tough rock masses that must be crushed before the valuable minerals can be released.

Grinding

In this process stage, the crushed material can be further disintegrated in a cylinder mill, which is a cylindrical container built to varying length-to-diameter ratios, mounted with the axis substantially horizontal, and partially filled with grinding bodies (e.g., flint stones, iron or steel balls) that are caused to tumble, under the influence of gravity, by revolving the container.

A special development is the autogenous or semiautogenous mill. Autogenous mills operate without grinding bodies; instead, the coarser part of the ore simply grinds itself and the smaller fractions. Tosemiautogenous mills (which have become widespread), 5 to 10 percent grinding bodies (usually metal spheres) are added.

Concentrationents

Concentration involves the separation of valuable minerals from the other raw materials received from the grinding mill. In large-scale operations this is accomplished by taking advantage of the different properties of the minerals to be separated. These properties can be colour (optical sorting), density (gravity separation), magnetic or electric (magnetic and electrostatic separation), and physicochemical (flotation separation).

Optical separation

This process is used for the concentration of particles that have sufficiently different colours (the best contrast being black and white) to be detected by the naked eye. In addition, electro-optic detectors collect data on the responses of minerals when exposed to infrared, visible, and ultraviolet light. The same principle, only using gamma radiation, is called radiometric separation.

Gravity separation

Gravity methods use the difference in the density of minerals as the concentrating agent.

In heavy-media separation (also called sink-and-float separation), the medium used is a suspension in water of a finely ground heavy mineral (such as magnetite or arsenopyrite) or technical product (such as ferrosilicon). Such a suspension can simulate a fluid with a higher density than water. When ground ores are fed into the suspension, the gangue particles, having a lower density, tend to float and are removed as tailings, whereas the particles of valuable minerals, having higher density, sink and are also removed. The magnetite or ferrosilicon can be removed from the tailings by magnetic separation and recycled. As the professional manufacturer of complete sets of mining machinery, such as mobile crusher, Henan Hongxing is always doing the best in products and service. jaw crusher:http://www.hxjqchina.com/product-list_11.html
ball mill:http://www.hxjq-crusher.com/20.html

Flotation separation

Flotation is the most widely used method for the concentration of fine-grained minerals. It takes advantage of the different physicochemical surface properties of minerals—in particular, their wettability, which can be a natural property or one artificially changed by chemical reagents. By altering the hydrophobic (water-repelling) or hydrophilic (water-attracting) conditions of their surfaces, mineral particles suspended in water can be induced to adhere to air bubbles passing through a flotation cell or to remain in the pulp. The air bubbles pass to the upper surface of the pulp and form a froth, which, together with the attached hydrophobic minerals, can be removed. The tailings, containing the hydrophilic minerals, can be removed from the bottom of the cell.

Flotation makes possible the processing of complex intergrown ores containing copper, lead, zinc, and pyrite into separate concentrates and tailings—an impossible task with gravity, magnetic, or electric separation methods. In the past, these metals were recoverable only with expensive metallurgical processes.

Magnetic separation

Magnetic separation is based on the differing degrees of attraction exerted on various minerals bymagnetic fields. Success requires that the feed particles fall within a special size spectrum (0.1 to 1 millimetre). With good results, strongly magnetic minerals such as magnetite, franklinite, and pyrrhotite can be removed from gangue minerals by low-intensity magnetic separators. High-intensity devices can separate oxide iron ores such as limonite and siderite as well as iron-bearing manganese, titanium, and tungsten ores and iron-bearing silicates.

Electrostatic separation

The electrostatic method separates particles of different electrical charges and, when possible, of different sizes. When particles of different polarity are brought into an electrical field, they follow different motion trajectories and can be caught separately. Electrostatic separation is used in all plants that process heavy mineral sands bearing zircon, rutile, and monazite. In addition, the cleaning of special iron ore and cassiterite concentrates as well as the separation of cassiterite-scheelite ores are conducted by electrostatic methods.