digital divide network - article database

The installation of the flat panel television over the fireplace to give it a dynamic look is not an easy task, from the unpacking of the television to the installation of the television is not an easy task, each work is important and need to be performed carefully, this is why we are giving some instructions to unpack your television here which can help you to get an idea about the television mounting. Instructions for unpacking When you are unpacking your television carefully open packet and slowly remove the cotton from television packet. Remove the contents and lay those out on the cardboard or you can use other protective surface in order to avoid damage. Keep these entire things away from children’s reach, because they can easily damage it .Check the contents against the supplied parts list on the next page to assure that all components received undamaged and don’t use any damaged or defective part. To make safe installation precautions are very necessary, so here we are giving some safety instructions because now dynamic mounting is not as easier take some complicated actions. Important safety instructions Please install and use this device carefully because any type of damage cause waste of your money and time both and when you are going to install it, first read the entire manual before installation of this TV. Follow all the instructions which are carefully given in manual. Use proper safety equipments during installation. Don’t apply those methods which are in manual but you are not able to understand properly, in this case try to take the help of the professional experts. If you are uncertain about the nature of your wall so doesn’t take any decision too faster, get some idea about wall and related television nature first. Don’t use any product to build walls, choose only that one which is suitable for television. Mounting of the wall plate to the wall This type of mounting is called a brick, solid concrete and concrete block mounting, this type of fireplace mountmounting wall plate is used as a template to mark six hole location on the wall .Three on the top row of slots and three more places on the bottom row of the wall .Make sure these holes should be in level and should have a certain distance between any two holes .Now insert concrete anchor into each of these holes but make sure concrete seated up properly in these holes and attach the wall plate to the wall using lag bolts and lag bolt washers. Wood stud mounting It is another way by which you can mount your plate over the wall, to mount your television with this type of mounting, the wall plate must be mounted to two wood studs, and you can use two wood studs, use a stud finder to locate two adjacent studs. It is a very good idea to verify where the studs are located, with the help of studs you can mount the television plat over the wall. http://www.dynamicmounting.com/